Project 2 - Boolean Arithmetic
In this part of the course you will have to read chapter 2 of the book (Boolean Arithmetic), after reading the chapter you will have to read the following instructions to be able to implement project 2.
Instructions
Each chip in this project is specified by a skeletal *.hdl program with a missing implementation part. In addition, each chip is accompanied by a supplied *.tst script file that tells the hardware simulator how to test it, and a supplied *.cmp file that lists the expected output of the *.hdl program, as mandated by the *.tst script file. All these files are available in a single Chips Set zip file, which you should download to your computer (explained below).
The contract: when loaded into the hardware simulator, your chip design (*.hdl program modified by you), tested on the script specified in the supplied *.tst file, should deliver the behavior specified in the supplied *.cmp file. If that is not the case, the simulator will let you know.
Build the following gates, using solely previously-built gates.
Half
Adder Full
Adder 16-bit
adder 16-bit
incrementer Arithmetic
Logic Unit
Chip(HDL)
Function
Test
Scripts
Compare
Files
Resources
-
Chips Set (project2.zip) (download): Extract to an empty directory, and keep the default directory structure as is.
-
Chapter 2 of the book - "Boolean Arithmetic".
-
Appendix A - HDL.
-
Appendix B - Test Script Language.
-
Guidelines for submitting.
-
Submission is done through the Administratives page.